Step by spep instructions on how to use Easy Clean.
Click The Download Link Instructions PDF
Easy Clean All-Purpose Cleaner Instructions
Spray Easy Clean on lime-scale and leave for several minutes. Agitate with a scotch bright or nylon brush. Rinse with water. You may need to repeat the process for long-term build-up. Easy Clean removes soap scum leaving shower cubicles, bathtubs, windows, porcelain, chrome and mirrors astonishingly clean. Simply spray the surface, using a clean dry cloth wipe dry.
Easy Clean is excellent at neutralizing odours left behind by pets. Spray the stained area thoroughly with Morris Clean. Leave the solution on for up to two minutes, and then rub with a clean nylon brush. Re-spray the area and wipe with a wet cloth to "lift" the stain. Dry the area with a clean towel. Note* (Cover the cleaned area until dry. This will stop re-staining.)
Please, Note* the ability to take out a carpet stain depends on age, heat exposure, whether or not the staining has already been "cleaned," or bleached. Spray the area with Easy Clean and leave for one to two minutes, depending on how old the stain is. Re-apply Easy Clean and agitate with a cloth or small brush. Work the stain from the outside in the centre. Spray a third time and repeat. Now with a clean dampened cloth "pick up" the stain by rinsing with the wet cloth in circular motions, working, once again, from the outside into the middle. Wipe dry with a towel. Cover the area with a dry cloth after cleaning until it dries. (Avoiding re-staining from dirty foot traffic)
Add one 4g sachet or one T-spoon of Easy Clean to one gallon (4.2ltrs) of water. You must firstly vacuum the area to be shampooed. Pre-spray with Easy Clean all heavily soiled areas and let the product sit for a couple of minutes. Machine clean the carpet, concentrating on heavily soiled areas. Allow the carpet tp dry thoroughly and vacuum.
I find that if you spray the floor thoroughly, concentrating on heavily stained areas and leave the Easy Clean solution for up to 5 minutes, then mop with clean hot water, it leaves outstanding results. So why do I suggest you spray the floor rather than adding the powder straight into the mop bucket? The answer is simple. By spraying Easy Clean onto the floor, you will not only be saving money but will be tackling ground-in dirt more effectively.
Add one 4g sachet or one T-spoon of Easy Clean to one gallon (4.2ltrs) of water. Pre-spray all heavily soiled areas and leave for a couple of minutes. For heavy greasy and engine oil use a wire brush.
Easy Clean is a fantastic glue dissolving cleaner, especially superglues & duct tape. Remove any tape left behind on the surface. Spray the glue residue with Easy Clean and let it penetrate for a couple of minutes. Re-spray the area and rub the residue away with a clean dry cloth.
Easy Clean is safe on all fine jewellery, to clean just add one sachet or one T-spoon of powder to a litre glass or bowl of water. Place the jewellery and watches into the solution for one to two minutes. *Note. Do not immerse non-waterproof watches, but instead hold the movement in such a manner that the band is in the solution. Use a small toothbrush to agitate within the crevices, rinse the objects in a second glass or bowl of clean water, and wipe clean.
Easy Clean is super effective at cleaning all types of ovens. Spray plentiful amounts of Easy Clean on the oven grease build-up and allow it to sit for up to 5 minutes, re-spraying as necessary. Scrub the area with Scotch-bright type scrubber. On blackened carbon you may need to use non-scratch stainless wool. Spray the area again and wipe clean.
Use Easy Clean for cleaning Grills, Filters & Carbonized Cookware. Fill a plastic container or your sink up with warm water. Add one sachet or one T-spoon of Easy Clean to every 4.2 litres of water. Place the filters, grills, steel or aluminium pans that are heavily carbonised into the container. Leave the equipment for an hour or two and rinse with clean water. For massive carbon build-up, you may need to use a green pad or leave it overnight to soak.
For deep cleaning of Dishwashers. Spray the interior with Easy Clean, including seals, which often are subject to mildew. Leave for several minutes, then wipe down the seals. Re-spray inside the dishwashing machine, and run on short cycle to clean.
Turn-off the fryers and once the oil has cooled, empty the fryers and filter the oil.Close the taps and fill the fat fryers with water to just above the oil level line. Add one sachet or one T-spoon of Easy Clean per fryer. Bring the water to a boil and imminently turn the fryers off. Leave the solution to sit for a minutes. This will clean both the vessel and the element. Let the water cool and empty. Rinse the deep fat fryers with clean water and dry before replenishing oil.
Easy Clean is excellent for polishing as well as cleaning stainless steel, worktops and kitchen appliances. Spray the area with Easy Clean depending on how dirty the surface is. Let the product sit for between 10 & 60 seconds. Re-spray and wipe clean. After cleaning stainless steel surfaces, always polish the surface with a clean damp cloth, thus removing any residue left from the cleaning process
Use Easy Clean for Laundry and pre-spotting Stains such as red wine, juices, coffee, grass, rust, etc. Spray the stained area thoroughly, agitate by rubbing the cloth against itself or with a soft bristled brush, before placing the garment into the washing machine.
Spray the mold or mildew thoroughly with Easy Clean. Rub with a soft bristled nylon brush or sponge in circular motions and rinse with water. Repeat this method until clean.
When cleaning walls and painted surfaces always spray Easy clean from the bottom upwards, helping to prevent cleaning lines. Allow the solution to penetrate grease and grime for a few about 30 seconds. Repeat the process and using a clean sponge remove the grease and dirt. *Note. Using a sponge is excellent for getting into porous and cracked surfaces. Wipe dry with a clean damp cloth.
Spray the upholstered area with Easy Clean and leave for a couple of minutes. Re-spray the area and using a clean damp cloth. Work in circular motions to remove dirt and stains. For heavy build-up, you may need to repeat the process.
Spray the grouted area thoroughly with Easy Clean allowing the solution to penetrate for several minutes. For heavy greasy build-up, you may need to agitate the area with a soft bristled nylon brush and rinse with cold running water. Repeat until clean. *Note. Sponges are ideal for getting into porous areas.
When washing all types of vehicle exteriors, add one sachet or one T-spoon of Easy clean to a five-litre bucket of warm water. Using a sponge, wash the paintwork in circular motions, rinsing the sponge in the bucket frequently. Rinse off with clean water before the paintwork dries, and dry with a chamois or towel. Removing Dead Paint form Vehicles Easy Clean is excellent at removing oxidised paint, leaving a more immaculate, brighter finish. When Old paint becomes "chalky" is it is oxidised. If you're cleaning something that's quite old or has been out in the sun for a while, don't be alarmed if it seems that some of the "colour" is coming off on your cloth. What's happening is that you are removing the oxidised portion of the paint coat. You'll also notice that the paint is brighter as you clean and becomes more colourful. You may wish to protect that paintwork with a wax coat after cleaning. Detailing Cars, Boats & Caravans. Use Easy Clean when detailing Cars, Boats, & RV Interiors - Spray Easy Clean on the area to be cleaned. Using a damp cloth or sponge, wipe the surface in a circular motion. Rinse the cloth or sponge in clean water, wring out and re-wipe the area. Now buff dry with a clean cloth or towel. *Note. For car seats please see upholstery cleaning. Alloy Wheels, Rims & Rubber Spray the alloy wheels, tires and rims. Agitate with a damp cloth on surfaces or a soft bristled nylon brush to get into crevices. Rinse with clean water and wipe dry. For heavy greasy and break-dust problems, you may need to re-spray the rims and polish with a clean white cloth; *Note. For whitewalls use a soft brush or sponge. Easy Clean is non-corrosive and safe to use on all types of metal.
Easy Clean is an excellent cleaner/degreaser for removing hydraulic fluid leakage on aircraft surfaces and hanger flooring. Spray the solution on to the hydraulic leakage and leave for a couple of minutes. Re-apply the product and wipe clean. You may need a soft nylon brush for stubborn grease. If you are using floor cleaning machines for hanger floors then add one sachet to 4.2 litres of water.